Bracket system now reaches further
31st March 2015
|
Improvements to ISO-CHEMIE’s Iso-Top Winframer load-bearing bracket system have given it extended reach and increased overhang of installed windows, says the company.
Iso-Top Winframer enables installers to quickly fit windows into the insulation area between the inner and outer walls, avoiding the need to use potentially thermal-bridging metal brackets which can cause non-repeating thermal bridging and give extensive problems when the windows need replacing.
Now, a selection of new system brackets provide increased overhang whenever necessary. These are available in three sizes: a 80mm wide x 80mm high bracket to fit the majority of UK window sizes and a 140mm wide x 90mm high option for deeper window profiles, or for use with combination products such as roller shutters.
A third bracket size (200mm wide x 110mm high) is designed for reaches from 160mm to a maximum of 200mm, providing a robust, strong and high performance support frame with a high load-bearing capacity that’s capable of supporting heavier window loads as well as bi-fold doors.
New system boards, available in thicknesses of 30mm wide x 50mm high, 50mm wide x 60mm high, 30mm wide x 80mm high and 50mm wide x 110mm high, are available in a 1,200mm length for additional overhang capacity or incorporation in a front-of-wall installation system.
Iso-Top Winframer can be used with a range of ISO-Chemie foam tape sealant systems to provide effective and high performance window sealing. These include ISO-BLOCO One, ISO-BLOCO One Control, ISO-BLOCO 300 and 600, the ISO-CONNECT Vario range of self-adhesive foils and fleeces, and ISO-TOP Flex Adhesive WF for bonding and sealing to masonry and joint/corner sealing
www.iso-chemie.co.uk
|